Mobile Menu
- Home
- Кровельные материалы
- Izolate
- izotest 2.0
- About as
- Blog
- Contact
-
Your shopping cart is empty!
All Categories
- All Categories
- Izmeritel'nye instrumenty
- Anemometry i balometry
- Detektory provodki
- Gigrometry i vlagomery
- Raskhodnye materialy
- Diski otreznye
- Nasadki dlya graverov
- Nozhi dlya rubankov
- Pil'nye diski
- Ruchnoj instrument
- Kleshchi i bokorezy
- Lomy i gvozdodyory
- Molotki i kuvaldy
- Zaklepochniki
- Ventum products
- Cement-based putties and plasters
- Напольное покрытие на цементной основе
- Изолирующая соль
- Primer
- Система предупреждения протечек
- Контролит
- Elektroinstrument
- Dreli
- Gajkoverty
Ready-to-use special heat-resistant dry glue with a cement base up to + 300°C - used in gluing in furnaces and fireplaces containing such finishing materials as faience, ceramic tiles, marble, granite slabs, glass mosaic screed, etc. on the surface of an old coating of ceramic and marble slabs or on the surface of screeds, concretes in closed and open areas, in horizontal and vertical surfaces, in the pools, baths, water tanks, etc., in wet rooms, consisting of necessary extra chemical additives and polymers of the main components of cement. Sudden temperature changes and icing do not render any influence.
APPLICATION:
Before use, the surface must be cleaned of dust, grease, paint, etc. If the surface temperature is above 25°C, the surface must be wetted with water. One bag (20 kg) of powder is carefully poured into a container with 5-5.8 liters of water and preferably mixed with a mixer until lumps disappear. The solution is left for 10 minutes, then re-mixed for 5-10 minutes and applied. When pressed, the solution is smeared onto the surface and evenly smoothed with a trowel with suitable teeth. Tiles must be glued onto a mortar smoothed with a trowel for 15-20 minutes. Ready-to-use solution must be used within 2-3 hours. Otherwise, it cannot be used by adding additional water or powder. It is applied after filling the joints after 24-48 hours. The above values are valid for external parameters +23°C ± 2 heat and 50% ± 5 humidity. These values may vary depending on external parameters.
Use at temperatures: +5°С /+35 °С.
Area of application based on tile size: 4-5 kg/m²
Type of packaging: 20 kg bags
When stored in a dry place in the original packaging, the shelf life of the product is 12 months.
| Тех характеристики | |
| Вес, кг | 20 |