Mobile Menu
- Home
- Кровельные материалы
- Izolate
- izotest 2.0
- About as
- Blog
- Contact
-
Your shopping cart is empty!
All Categories
- All Categories
- Izmeritel'nye instrumenty
- Anemometry i balometry
- Detektory provodki
- Gigrometry i vlagomery
- Raskhodnye materialy
- Diski otreznye
- Nasadki dlya graverov
- Nozhi dlya rubankov
- Pil'nye diski
- Ruchnoj instrument
- Kleshchi i bokorezy
- Lomy i gvozdodyory
- Molotki i kuvaldy
- Zaklepochniki
- Ventum products
- Cement-based putties and plasters
- Напольное покрытие на цементной основе
- Изолирующая соль
- Primer
- Система предупреждения протечек
- Контролит
- Elektroinstrument
- Dreli
- Gajkoverty
DESCRIPTION:
Ready-made special waterproof, frost-resistant reinforced two-component cement-based adhesive - used in gluing such heavy finishing materials as faience, ceramic tiles, marble, granite slabs, glass mosaic screed, etc. on the surface of an old coating of ceramic and marble slabs or on the surface of screed, concrete in closed and open areas, in horizontal and vertical surfaces, in a pool, bath, water tanks, etc., wet rooms, made of the main components of cement, including necessary extra chemical additives and polymers. Sudden temperature changes and icing are not affected. Used for large tiles such as porcelain stoneware, granite slabs, etc. It provides waterproofing due to its high polymer content. It has a high adhesion property. Water resistant, frost resistant. The high degree of elasticity S2 provides surface resistance to abrupt changes in climatic conditions. It is easily distributed by a corrugated spatula.
APPLICATION:
Before use, the surface must be cleaned of dust, grease, paint, etc. If the surface temperature is above 25°C, the surface must be wetted with water. One bag (20 kg) of powder is carefully poured into a container and mixed with a special LATEX liquid additive and preferably to be mixed with a mixer until the lumps disappear. The solution is left for 5 minutes. Then it should be re-mixed for 5 minutes and applied. When pressed, the solution is smeared onto the surface and evenly smoothed using a trowel with suitable combs. Tiles must be glued onto a mortar smoothed with a trowel for 15-20 minutes. Ready-to-use solution must be used within 1-1.5 hours. Otherwise, it cannot be used by adding additional water or powder. The joints are filled after 24-48 hours. The above values are valid at external parameters +23°C ± 2 heat and 50% ± 5 humidity. These values may vary depending on external parameters. Use at the temperature of + 5°C/+ 35°C. Area of application based on tile size: 4-5 kg/m².
Type of packaging: 20 kg bags.
When stored in a dry place in the original packaging, shelf life of the product is 12 months. It is allowed to fold a maximum of 10 bags. The base of the solution is made of constituent elements of cement. Do not inhale and avoid contact with skin and eyes.
| Тех характеристики | |
| Вес, кг | 20 |