Mobile Menu
- Home
- Кровельные материалы
- Izolate
- izotest 2.0
- About as
- Blog
- Contact
-
Your shopping cart is empty!
All Categories
- All Categories
- Izmeritel'nye instrumenty
- Anemometry i balometry
- Detektory provodki
- Gigrometry i vlagomery
- Raskhodnye materialy
- Diski otreznye
- Nasadki dlya graverov
- Nozhi dlya rubankov
- Pil'nye diski
- Ruchnoj instrument
- Kleshchi i bokorezy
- Lomy i gvozdodyory
- Molotki i kuvaldy
- Zaklepochniki
- Ventum products
- Cement-based putties and plasters
- Напольное покрытие на цементной основе
- Изолирующая соль
- Primer
- Система предупреждения протечек
- Контролит
- Elektroinstrument
- Dreli
- Gajkoverty
BASIS - (1/5lt)® - acrylic primer
Description:
Acrylic primer - for external and internal use based on water and acrylic, copolymer.
Features:
High-quality and powerful acrylic primer for application on external and internal wall surfaces. It has a high water-repellent feature, creates insulation and prevents excessive paint consumption, as well as contributes to a durable surface coating. It allows air to pass through and completely covers the surface. Prevents cracks from appearing on terraces, balconies, toilets, bathrooms, as well as between window frames and the wall. Does not crumble after application. BASIS - (1/5)®, gives the walls a moisture-repellent property, and also increases the service life of the paint applied to the surface. An environmentally friendly product.
It is used on various surfaces of plaster, gypsum concrete and lime.
Surface preparation:If there are remnants of a layer of old, sagging, convex paint on the surface, it should be cleaned. It is also necessary to clean the protrusions and roughness on the surface. The surface on which the paint will be applied must be clean, dry and free of dust.
The method of application:When applied over raw plaster or whitewash, it is necessary to dilute with water in a ratio of 0.5 lt of primer per 5 liters of water. Do not mix with other primers. Coating area: 5.5 liters of diluted primer covers an area of 100-150 m2 (± 30% depending on the applied surface).
Drying Time:Dries in an hour at a temperature of + 20 ° C; completely hardens within 24 hours.
After application:The painted surface must be protected for 24 hours from rain, snow, frost, excessive heat and physical damage. Ventilate the room during painting and drying.
Storage conditions:Store in unopened original packaging for 12 months. Keep away from direct sunlight, freezing, water and humidity.
Safety precautions:S2: Keep out of reach of children.
S24/25: Avoid contact with eyes and skin.
S29: Do not throw into the sewer.
S46: In case of contact with the mouth, consult a doctor immediately. Show the container and label to the doctor.